In some instances, your MacBook Pro may fail to charge when it is plugged in, and you may be concerned about why this is happening. Here we will explain why your MacBook Pro won’t charge when plugged in and how to resolve the issue.
If your MacBook Pro isn’t charging, there are various possible reasons. The following are some common reasons why your MacBook may not be charging even when it is plugged in:
- Your charger or adapter has stopped working.
- The charging cable has been damaged in some way.
- Your Mac’s battery software fault or wrong settings are causing an overheating problem.
- There is a problem with the outlet you are currently utilizing.
As long as it is not a hardware problem, the MacBook Pro will be easily fixed by following a few steps. However, before you begin applying fixes to your MacBook Pro, you should consider the age of your device because this plays an essential role in how you will apply fixes.
What to Do If Your MacBook Battery Will Not Charge?
If your MacBook Pro does not charge when plugged in, there are various things you can try to fix the problem. The following are some suggestions for troubleshooting your battery’s inability to charge when it is plugged in.
Inspect the wall outlet.
You should plug the charger into the wall power socket appropriately. For example, if you use an extension board, you may want to connect the charger straight to the wall socket rather than via the extension board. If your MacBook’s battery is completely depleted, the power cord will not be able to recharge it. As a result, you will be compelled to use your MacBook solely while it is connected to a power source unless you purchase an extra battery to accommodate this situation.
You may find that your MacBook does not charge, even though the battery in the Mac is in good condition. In certain cases, this might be caused by erroneous system settings, dirt in your charging cord, or a power cable that is no longer working properly.
Examine the condition of your MacBook battery.
Keep the Option key pressed down while clicking the Battery icon in your menu bar to see how much battery life is left on your Mac. To find out how many cycles your computer has gone through, click the Apple symbol in the system tray and choose About This Mac from the drop-down menu. Once you have clicked System Report, navigate down and choose Power from the sidebar. The cycle count can be seen under the Health Information section.
Make use of the proper power adapter.
Apple makes MacBook power adapters in various sizes to accommodate the various batteries used per model. If your power adapter is too tiny to fit into the socket on your Mac, it may not have enough power to recharge the battery. Even though the included power adapter powers your MacBook, this might be the situation in some instances. To check what model of Mac you have, open the “About This Mac” window. Then go to Apple’s site to check out what kind of power adaptor you need for your computer.
System Management Controller should be reset.
The SMC is a component of the circuit board that regulates how the computer interacts with electricity. The SMC may have intermittent faults, which might cause problems on your Mac, switch off, or power down without warning. You may reset the SMC to correct these issues without worrying about losing any information on your MacBook.
Examine your adapter and charging port for damage.
Even if you’re using the proper power adapter for your MacBook, a mechanical issue might cause your Mac’s inability to charge. First, remove your adapter from the wall and scrutinize it throughout its whole length for signs of damage. Scorch marks, exposed wire, or even a bend in the cable are examples of what you should look for.
To ensure that the adapter is not damaged, try plugging it into a separate Mac and seeing whether that Mac also displays “Not Charging.” You must also look at the charging connector on your MacBook for any problems. For example, you might loosen the USB-C port, or maybe debris is blocking up the port on your Mac. Either one of these factors might be the source of your MacBook’s inability to charge while it is connected.
Examine your battery to see whether it is defective.
If your MacBook battery isn’t charging or running too quickly, this might be the source of the problem. The battery symbol can be seen in the menu bar. If it reads “Service Battery,” your battery will likely have to be changed. The battery has become obsolete and will no longer be able to maintain the charge it originally did.
Restart your MacBook.
A simple restart of your MacBook may be all that is required to enable the hardware to rest and restore functionality to your Mac charger. Switch your gadget off and back on by selecting Restart from the App Icon in the screen’s upper-right corner. In addition to allowing the MacBook to cool down, it would be ideal if you could do so at the same time.
Allow your laptop to cool down.
If your machine is overheating, it may harm the battery performance of your device. Whenever the thermal sensors in your device sense an unusually high internal temperature level, they will prevent access to the power source. Is your MacBook hot to the touch when you use it? Leave it off for a time, or use an extra fan to assist in cooling it down if necessary.
Conclusion
Several factors might be contributing to your MacBook’s inability to charge even when it is plugged into the power source. The most prevalent causes of these failures include:
- A dead or malfunctioning adapter
- A broken charging cable
- An overheated MacBook
- A faulty battery
There are also a lot of steps you can take to fix the issue. However, if you follow all the steps and still fail to fix the problem, you should take your MacBook to an expert.