Airpods Can’t Change Mode: Troubleshooting Tips

Are you having trouble changing the mode on your AirPods? It can be frustrating when you can’t switch between noise cancellation and transparency mode or adjust the equalizer settings. But don’t worry; there are troubleshooting tips that can help you resolve this issue.

In this article, we will guide you through some steps to try and get if your AirPods Can’t Change Mode and bring back in the mode-changing action.

Firstly, checking if your AirPods have the latest software updates is important. Sometimes, outdated software can cause glitches and prevent mode changes. To do this, connect your AirPods to your iPhone or iPad and go to the settings. Look for the ‘Software Update and tap on it to check if any updates are available for your AirPods.

If there are updates, download and install them to ensure optimal performance.

If updating the software didn’t work, you can try resetting your AirPods. This can help resolve any connectivity issues that might be hindering mode changes. To reset your AirPods, open the lid of the charging case and press and hold the button on the back until the LED light on the front starts flashing white. Then, release the button and wait for the AirPods to reconnect to your device. Once the connection is established, try changing the mode to see if the issue has been resolved.

Check for Software Updates


Ensure you’re running the latest software on your AirPods by checking for updates. This is one of the troubleshooting steps you can take if you’re experiencing any common issues with your AirPods. Software updates often include bug fixes and improvements that can resolve any problems you may be facing.

To check for updates, connect your AirPods to your iPhone or iPad, go to the Settings app, and navigate to the Bluetooth settings. From there, you should see your AirPods listed, and if there’s an available update, you’ll have the option to install it. Keeping your AirPods software up to date ensures you have the best experience with your wireless earbuds.

In addition to checking for software updates, troubleshooting any issues you’re facing with your AirPods is also a good idea. Some common issues include connection problems, low volume, or one AirPod not working. To troubleshoot these issues, you can try resetting your AirPods by placing them in their case, opening the lid, and pressing and holding the setup button on the back until the LED light starts flashing.

Another troubleshooting step is to forget your AirPods on your device and then reconnect them. This can help refresh the connection and resolve any connectivity issues. By following these troubleshooting tips and keeping your AirPods software up to date, you can ensure that your wireless earbuds are working properly and enjoy your music, podcasts, and calls without interruptions.

Reset Your AirPods


Press and hold the setup button to reset your AirPods until the LED indicator flashes amber. This indicates that the reset process has been initiated. The setup button is located on the back of the AirPods case. Hold the button until the LED indicator changes to white, then flashes amber again. This means the AirPods have been reset and are ready to be set up again.

Performing a factory reset can be a helpful troubleshooting step when your AirPods are not changing mode. It can help resolve any software issues that may be causing the problem. Once you have reset your AirPods, you can follow the setup process again to connect them to your device.

If the issue persists, you may need to consult the troubleshooting guide provided by Apple or contact their support for further assistance.

Disconnect and Reconnect Your AirPods


If the issue persists, you may have to disconnect and reconnect your AirPods. This step can help resolve any connectivity issues you’re experiencing.

To do this, start by going to the Bluetooth settings on your device. Find the AirPods in the list of connected devices and tap on the ‘i’ icon next to them. Then, select ‘Forget This Device’ and confirm your choice.

Once you’ve done that, put your AirPods back in the case and close the lid. Wait for a few seconds, then open the lid and press and hold the setup button on the back of the case until the LED light starts flashing white. Your AirPods should now be disconnected from your device.

After disconnecting your AirPods, it’s a good idea to clean them and the case to ensure no obstructions or debris causing connectivity issues. Use a soft, lint-free cloth to wipe down the AirPods and the case gently. Pay attention to the charging contacts on the AirPods and the case, as dirt or debris can interfere with the charging process.

Additionally, check for any visible damage on the AirPods or the case. If you notice any, it may be necessary to contact Apple support for further assistance.

Once you’ve cleaned and inspected your AirPods, you can reconnect them to your device following the initial setup process.

Clean Your AirPods and Charging Case


After disconnecting your AirPods, cleaning them to ensure optimal performance and sound quality is important. Proper maintenance is key to prolonging the lifespan of your AirPods and keeping them in top-notch condition.

Here are some cleaning techniques to follow:

  • Gently wipe the exterior surfaces of your AirPods and charging case with a soft, lint-free cloth. This will help remove any dirt, dust, or smudges that may have accumulated over time.
  • Use a dry cotton swab or a soft-bristled brush to remove debris from the speaker mesh on your AirPods. Be careful not to push the debris further into the mesh.
  • Use a slightly damp cloth or cotton swab to clean the charging contacts on the AirPods and the charging case. Dry them thoroughly before placing them back in the charging case.

Regularly cleaning your AirPods and charging case ensures they stay in good working condition and provide you with the best sound experience possible. Taking the time to maintain your AirPods will improve their longevity and enhance your overall listening pleasure.

So, don’t forget to clean them now and then properly!

Contact Apple Support for Further Assistance


For further assistance with any issues you may be experiencing, it is recommended that you contact Apple Support. Their team of experts is trained to provide the best possible solutions for troubleshooting your AirPods. Whether you are having trouble with your AirPods not charging properly or experiencing common connectivity issues, Apple Support can guide you through the necessary steps to fix these problems.

To give you an idea of the troubleshooting steps for AirPods not charging properly, here is a table that outlines some common issues and their solutions:

Common IssueTroubleshooting Steps
AirPods not chargingEnsure the charging case is plugged in and has power
2. Clean charging contacts on AirPods and case
3. Reset AirPods by holding the setup button
AirPods case not chargingTry a different charging cable and power source
2. Clean charging contacts on the case
3. Reset the case by holding the button on the back

For connectivity issues, here are some common problems and their solutions:

Common IssueTroubleshooting Steps
AirPods not connectingEnsure Bluetooth is enabled on your device
2. Put AirPods in their case and close the lid
3. Restart your device and try connecting again
One AirPod not workingClean the affected AirPod and charging contacts
2. Try using the non-working AirPod with the other side
3. Reset AirPods and try connecting again

Remember, if you encounter difficulties while troubleshooting your AirPods, don’t hesitate to contact Apple Support. They are there to assist you and provide the necessary guidance to get your AirPods working seamlessly again.


In conclusion, you can try several troubleshooting tips if you’re experiencing issues with your AirPods not changing modes. First, check for any software updates for your AirPods, which may resolve the issue.

If that doesn’t work, you can try resetting your AirPods by following the appropriate steps. Additionally, disconnecting and reconnecting your AirPods to your device might help.

Keeping your AirPods and charging case clean is also important to ensure optimal performance. If you’ve tried all these troubleshooting tips and still have no luck, it’s recommended to contact Apple Support for further assistance.

Remember, technology can sometimes have hiccups, but with a little patience and following these troubleshooting tips, you can hopefully get your AirPods back to functioning properly.

Don’t hesitate to contact Apple Support if you need additional help, as they’re there to assist you in resolving any issues you may encounter.

Enjoy your AirPods and the convenience they bring to your everyday life!

Recent Posts